Electric$ense New Home Program Form

  • To qualify for this program’s $500 incentive, ONE of the following three Program/Code requirements must be met:
    • Electric$ense® New Home Program: To qualify for the incentive under this Program/Code, the following is required:
      • A qualified rater or inspector* must verify ALL the requirements on the attached checklist have been met unless Not Applicable.
      • Submit the completed checklist and this incentive form with Section 1 and Section 2 completed.
    • Electric$ense® New Home Program with blower door test in place of Ductwork & Air Infiltration Control requirements: To qualify for the incentive under this Program/Code, the following is required:
      • A qualified rater or inspector* must verify all requirements on the attached checklist have been met unless Not Applicable, except for the requirements in the Ductwork & Air Infiltration Control category.
      • A blower door test is required in place of the Ductwork & Air Infiltration Control requirements. Less than 3 air exchanges/hour at -50 Pascal is considered passing. Person performing the test must complete Section 3 of this incentive form.
      • Submit completed checklist and this incentive form with Section 1, Section 2, and Section 3 completed.
    • 2012 International Energy Conservation Code: To qualify for the incentive under this Program/Code, the following is required:
      • A qualified rater or inspector* must provide documentation showing compliance with IECC 2015 using REScheck software.
      • A blower door test is required. Less than 3 air exchanges/hour at -50 Pascal is considered passing. Person performing the test must complete Section 3 of this incentive form.
      • Submit documentation showing compliance with IECC 2012 and this incentive form with Section 1 and Section 3 completed.
    • Focus On Energy® New Homes Program: To qualify for the incentive under this Program/Code, the following are required:
      • A Wisconsin-built home must meet the energy efficiency requirements of Focus On Energy® New Homes Program.
      • Submit documentation showing compliance with Focus On Energy® New Homes Program & this incentive form with Section 1 completed.
  • New home or multi-family dwelling must be on cooperative’s lines.
  • For multi-family dwellings, each structure may receive only one $500 incentive. The incentive requestor must be the owner of the structure and a member of the cooperative.
  • Incentives are in place through December 19, 2025. Funds are limited so submit required documentation as soon as possible.
  • Required documentation must be submitted within 3 months of certification.
  • Additional eligibility criteria may apply. Program is subject to change or cancellation without notice. Contact cooperative for details.
  1. Required documentation listed below must be submitted no later than 3 months after certification.
    1. This incentive form
    2. Documentation as explained above, depending on which Program/Code was followed.
    3. The required checklist document can be found here. Required to submit below. 


Once submitted, this form will be automatically sent to Riverland Energy Cooperative.
Section 1: Member Information











Section 2: Rater/Inspector Verification
By signing this form, the rater or inspector certifies that the home has met:
1) All requirements in the attached checklist, unless Not Applicable, if member is qualifying with option 1 (Electric$ense® New Home Program) OR
2) All requirements in the attached checklist, unless Not Applicable, if member is qualifying with option 2 (Electric$ense® New Home Program less the Ductwork & Air Infiltration Control requirements). NOTE: Ductwork & Air Infiltration Control requirements can be marked Not Applicable as a blower door test is being done instead.



Section 3: Blower Door Test Verification
By signing this form, the person performing the blower door test certifies that the home has met the requirement of less than 3 air exchanges per hour at -50 Pascal.






Required Documents